Dialogic 1000Series, User Manual

Page: 225 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 225
Routing Table
5.2.5.1 Host List
Use this table to Add hosts to this group and Delete hosts from this group.
Figure 38 is a screen shot of the Host List configuration Web page:
Figure 38. Host List Configuration Web Page
5.3 Offline Testing
An offline facility exists to test the Routing Table without receiving actual calls. To use this feature,
navigate to the
Tests --> Router link via the Media Gateway’s user interface.
Two tables exist in this page. The “Inbound Route” table is used to take simulated call
characteristics from an incoming call. First, the call direction is selected, and then the call
information is entered. The “Outbound Route” table shows the result that would occur if the
simulated incoming call passed through the Routing Table.
The fields for simulated data match the Routing Table exactly with one exception. On inbound
TDM calls, enter the interface and channel instead of the TDM Trunk Group label. This helps test
the TDM Trunk Group configuration as well as the routing configuration.