Dialogic 1000Series, User Manual

Page: 127 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 127
Parameter Reference
3.8.4.9 Static TDM Calling Party
Description: Specifies the calling party that will be provided to the TDM interface if Outbound
TDM Calling Party Source is set to Static or VoIP_Preferred.
Note: When a DMG2000 is connected to a Mitel PBX and is configured for E1 QSIG, this parameter
must be set to one of the following options in conjunction with the Outbound TDM Calling Party
Source parameter:
• Outbound TDM Calling Party Source set to Static and Static TDM Calling Party set to a
number (e.g. 1234).
• Outbound TDM Calling Party Source set to VoIP and the VoIP endpoint must provide a
calling party number in the VoIP call/MWI call request.
• Outbound TDM Calling Party Source set to VoIP_Preferred and Static TDM Calling Party set
to a number (e.g. 1234).
Allowed Values: Any valid dialable number
Default Value = 1234
INI File Parameter Name = gwTdmOutboundCallingParty
3.8.4.10 ISDN Answer Supervision Enable
Description: If ‘Yes’, and an outbound call receives a Progress Indicator with a 1 or 8 (non-ISDN,
inband), then the gateway will use in-band answer-supervision to determine when the call has been
answered. If ‘No’, then a received CONNECT message will be used to determine when the call has
been answered.
Notes: 1. Progress Indicator 1-Call is not end-to-end ISDN or may be in-band information.
2. Progress Indicator 8-Inband treatment has been applied.
Allowed Values:
• Yes
• No
Default Value = Yes
INI File Parameter Name = isdnAnswerSupervisionEnable