Dialogic 1000Series, User Manual

Page: 143 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 143
Parameter Reference
Called Type of Number
Type of Number for the called party information. The user must select matching number type
according to the selected number plan. If the value is set to default, the gateway will set an
appropriate value depending on the called number.
Allowed Values:
• Default
• Unknown
• International
• National
• Network
• Subscriber
• Abbreviated
• Reserved
• Level2Regional
• Level1Regional
• PISNSpecific
• Level0Regional
TDM Passthrough
Valid only for the Default Rule. If set to Yes and call routing is TDM to TDM, the call type
information is copied from inbound to outbound call. Otherwise, the outbound call type
information is set to the default values.
Allowed Values:
• Yes
• No
Table 7. Default Number Type
All Unknown