Dialogic 1000Series, User Manual

Page: 99 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 99
Parameter Reference
Fax/Modem Tone Relay Mode
Description: Selects the Realtime Transfer Protocol (RTP) method by which fax and modem tones
are transported between the TDM network and VoIP network.
Allowed Values:
• RFC2833 = Fax and modem tones from the TDM network are sent as RFC2833 packets to the
VoIP network. RFC2833 packets from the VoIP network are rendered to TDM.
• Inband-Tone = Fax and modem tones from the TDM network are passed through VoIP.
Inband-Tone is only reliable when the Preferred Code parameter is set to G.711 only.
Default Value = RFC2833
INI File Parameter Name = dspFaxModemToneRelay
Enable V.34 Fax
Description: The gateway supports V.17 and V.34 fax modems.
Note: The V.34 fax modem setting is currently only supported on the DMG2030DTIQ and
DMG2060DTISQV34.
Allowed Values:
• Yes = The gateway will use V.34 fax modem.
• No = The gateway will not use V.34 fax modem but instead will use V.17 fax modem.
Default Value = No
INI File Parameter Name = gwV34Enable
V.34 Fax Speed Limit
Description: The gateway V.34 fax modem supports rate configurability.
Note: The V.34 fax modem rate setting is currently only supported on the DMG2030DTIQ and
DMG2060DTISQV34.
Allowed Values: {33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, 2400, None}
Default Value = 33600
INI File Parameter Name = gwV34SpeedLimit