Dialogic 1000Series, User Manual

Page: 179 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 179
Parameter Reference
3.19.2.10 T.38 UDPTL Redundancy Count for T.30 Messages (DMG2000 Only)
Description: Specifies the number of redundant IFP frames transferred with each UDPTL packet.
Allowed Values: 0 to 3
Default Value = 2
INI File Parameter Name = dspUdptlT30Redundancy
3.19.2.11 Fax Transmit Level (dBm) (DMG2000 Only)
Description: Set the fax transmit level in T.38 fax relay mode.
Allowed Values: -15 to 0
Default Value = -10
INI File Parameter Name = dspT38FaxTransmitLevel
3.19.2.12 Fax TDM Drop Out Bridge Time (DMG2000 Only)
Description: Sets the maximum TDM drop out time in milliseconds that the fax modem will try to
bridge.
Allowed Values: 0 to 1200 ms
Default Value = 0 (Disabled)
INI File Parameter Name = dspFaxTdmDropBridgeTime
Note: This parameter is only supported for V.34 release.
3.19.2.13 Fax Modem Carrier Detect Threshold (DMG1000 Only)
Description: Specifies the Threshold used to detect fax carrier.
Allowed Values:
• -26dBm
• -33dBm
• -43dBm
Default Value = -43dBm
INI File Parameter Name = dspT38CDThresholdDbm
Note: This is a *.ini file parameter only.