Dialogic 1000Series, User Manual

Page: 232 / 326

Routing Table
232
Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
6. Validate Routing Table.
The Routing Table can be validated using the Tests -> Router web page.
•
Navigate to Tests -> Router and enter data as per the following table.
Inbound Route
•
Inbound TDM
o
Inbound VoIP
Request Type Call
Port 1
Channel 1
Calling Number 156
Calling Name Bill
Called Number
213
Called Name Mary
Redirect Number
Redirect Name
•
Click on “Simulate Route”. The Test Results table (bottom of page) should be filled in as
follows:
Test Results
Results Test Passed
Reason
Inbound Rule All Inbound TDM
Outbound Group
All To 172.13.4.3
•
The Outbound Route table should be filled in as follows:
Outbound Route
VoIP Device
Bridged Method
172.13.4.3 Host
0
IP Port
156 Calling Number
Bill
Calling Name
213 Called Number
Mary
Called Name
Redirect Number
Redirect Name
•
Try several more Inbound Routes varying the Request Type, Port and Channel . Since all
Inbound TDM are routed using the same rule, the Outbound Route should be the same.
•
Now test the Inbound VoIP.