Dialogic 1000Series, User Manual

Page: 216 / 326

216 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Routing Table
Rule Label - Specifies label for this entry. This label is used only to help identify the rule to the
administrator. It is not used by any other tables in the Routing Table configuration.
Request Type - Specifies the type of telephony request to which the rule applies:
– Any = All telephony request types.
– Call = Calls only.
–
Message = Message-waiting notifications only.
Originating VoIP Host Address - Specifies the VoIP hosts from which requests are accepted for
use by the rule. The originating VoIP host's address must match this expression in order for the
telephony request to match the rule.
Table 12 shows the syntax for VoIP Host Address.
5.2.3.2 Inbound VoIP Request Matching
Defines the call-party information expressions that are used to match an inbound telephony request
from the VoIP network to this routing rule. The Inbound VoIP Request Matching is performed
when the inbound VoIP request matches the Request Type and Originating VoIP Address of one of
the defined rules.
CPID Matching
Part of the criteria for matching the characteristics of an incoming call to a rule in the Routing
Table is number matching. The incoming Calling Number, Calling Name, Called Number, Called
Name, Redirect Number, and Redirect Name is tested against a match rule defined in the Routing
Table. If the match fails, this routing rule table entry will fail.
Table 12. Syntax for VoIP Host Address
Token Description
* Matches any host address.
address Address may be a FQDN or an IP address, and must match
exactly.
IP_Addr/N Matches any IP address whose left-most N bits match the pattern
in IP_Addr. ex: 10.10.11.0/24 would match any IP address of the
form 10.10.11.XX, acting the same as a subnet mask of
255.255.255.0.
Note: A single entry may contain multiple hostnames and/or IP_Addr, each separated by a comma ','.
For example: 10.10.11.12,10.10.11.13,machine.domain.com .