Dialogic 1000Series, User Manual

Page: 156 / 326

156 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.16.9 MWI Response Timeout
Description: Specifies the time in milliseconds the Media Gateway Serial protocol Master will
wait for a failed response from the PBX before sending a success message to a Serial protocol
Slave in response to a message waiting indicator (MWI) request from the slave. This parameter is
only required when this Media Gateway is configured as the Serial Protocol Master.
Allowed Values: 100 to 60000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telSerMwiRspToutMs
3.16.10 IP Address of Serial Server
Description: Specifies the IP Address of the Media Gateway that is configured as the Serial
Protocol Master. Serial Protocol slave devices send and receive all Serial protocol information
to/from the Master device via the IP network. This parameter is only required when the Media
Gateway is configured as the Serial Protocol Slave.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = (no default value)
INI File Parameter Name = telSerAddrSrvr
Note: Unit requires a restart if this parameter value is changed.
3.16.11 Serial CPID Expiration
Description: Specifies the time in milliseconds that Serial CPID information received by a Media
Gateway (Master or Slave) remains valid. If the timeout expires before an inbound call is received
on the Media Gateway PBX port indicated by the Serial CPID information, the Serial CPID
information is discarded.
Allowed Values: 100 to 60000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telSerCpidExpMs