Dialogic 1000Series, User Manual

Page: 308 / 326

308 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Diagnostics
9.6.3.5 trace <trace key|all> reset
This command resets specified (or all) trace keys to their defaults (from system start).
9.6.3.6 trace all off
This command disables all traces, except Error and Debug , on all trace keys. Error and Debug
cannot be disabled.
9.6.3.7 trace port <1-based port number|all> <on|off>
This command enables or disables port-related traces.
Use:
trace port all off
to disable all telephony-port related traces
Use:
trace port 1 on
to enable only telephony port 1 related traces
9.6.3.8 trace time <on|off>
The trace time command enables or disables time stamps on traces.
9.6.3.9 trace -l
This command displays trace-types.
9.6.4 Examples of Trace Commands and Displays
The following are some examples of various trace commands and the resulting displays:
Example 1
Enable tracing of telephony events, such as button presses, lamps, displays, tones, etc.:
PIMG>trace tel event on
Ok
PIMG>exit
Good-Bye.
002:53:542 [Tel-1 ] Event Lamp 60:CallApp0:0 OFF->FLASH
002:53:782 [Tel-1 ] Event 0:0:48 | 250 |
002:53:784 [Tel-1 ] Event Cpid (250->) (Direct)