Dialogic 1000Series, User Manual

Page: 121 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 121
Parameter Reference
3.8.3.4 ISDN Protocol
Description: If ISDN is selected as the Signaling Mode, specifies the T1 ISDN protocol to be used.
Allowed Values:
• QSIG = QSIG ISDN protocol is used.
• NI-2 = US National ISDN - Phase 2 protocol is used.
• 5ESS = 5ESS protocol is used.
• DMS100 = DMS100 protocol is used.
Default Value = QSIG
INI File Parameter Name = t1IsdnProtocol
3.8.3.5 ISDN Protocol Variant
Description: Specifies the type of T1 ISDN protocol variant to be used.
Allowed Values:
• None = None (Standard)
• Alcatel = Support Alcatel Extensions
• Ericsson = Support Ericsson Extensions
• Avaya_IP_Office = Support Avaya IP Office Extensions
• Nortel_DMS-100 = Support Nortel DMS-100 Extensions
Default Value = None
INI File Parameter Name = t1IsdnProtocolVariant
3.8.3.6 Multiple Diversion Processing
Description: Selects which served (diverting) user to process when a call is received with multiple
stages of diversion.
User A -> User B1 (fwd) -> User B2 (fwd) -> User C
Notes: 1. For NI-2, Multiple Diversion Processing selects the Redirecting Number (IE 0x74) to use if
multiple Redirecting Number IEs are received. A maximum of two Redirecting Numbers is
supported.
2. For QSIG, Multiple Diversion Processing selects the served (diverting) user to process when a
call is received with multiple stages of diversion.