Develop ineo 4000P User Manual Download

Page: 213 / 217

User's Guide

- 213 -

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with

ISO 9296.

Note:

Some modes may not apply to your product.

1-meter average sound pressure, dBA

Printing (Simplex / Duplex) 55dBA / 54dBA

Ready

15dBA

For EU member states only

This symbol means:

Do not dispose of this product together with your household waste!

Please contact the Local Authority for appropriate disposal instructions. In the case of a new device being purchased,

the used one can also be given to our dealer for appropriate disposal. Recycling of this product will help to conserve

natural resources and prevent potential negative consequences for the environment and human health caused by

inappropriate waste handling.

This product complies with RoHS (2002/95/EC) directive.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your

local authorities for disposal and recycling options.

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands