Develop ineo 4000P Page 34 User Manual Download

Page: 34 / 217

User's Guide

- 34 -

Understanding the colors of the indicator and Sleep button lights

The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer

status or condition.

Indicator light color and its corresponding printer status

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blinking green

The printer is warming up, processing data, or printing.

Solid green

The printer is on, but idle.

Blinking red

The printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button light

Printer status

Off

The printer is idle or in Ready state.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is waking from or entering Hibernate mode.

Blinking amber for 0.1 second, then goes

completely off for 1.9 seconds in pulsing

pattern

The printer is in Hibernate mode.

Attaching cables

Connect the printer to the computer using a USB or to the network using an Ethernet cable.

Make sure to match the following:

•

The USB symbol on the cable with the USB symbol on the printer

•

The appropriate Ethernet cable with the Ethernet port

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands