User's Guide
- 109 -
Use
To
Timeouts
Print Timeout
Disabled
1–255 sec
Set the amount of time in seconds the printer waits to receive
an end-of-job message before canceling the remainder of the
print job.
Notes:
•
“90 sec” is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed.
•
Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print
jobs.
Timeouts
Wait Timeout
Disabled
15–65535 sec
Set the amount of time in seconds the printer waits for
additional data before canceling a print job.
Notes:
•
“40 sec” is the factory default setting.
•
This setting has no effect on PCL emulation print jobs.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Set the Auto Reboot.
Note:
Reboot always is the factory default setting.
Error Recovery
Max Auto Reboots
1–20
Set the Max Auto Reboot.
Notes:
•
If the device performs a number of automatic reboots
equal to this setting
’
s value within a certain amount of
time, then the device displays the applicable error instead
of rebooting again.
•
5 is the factory default setting.
Print Recovery
Auto Continue
Disabled
5–255 sec
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note:
Disabled is the factory default setting.
