Develop ineo 4000P User Manual Download

Page: 33 / 217

User's Guide

- 33 -

Use the

Display

View the printer status and messages.

Set up and operate the printer.

Left arrow button

Scroll to the left.

Select button

Select menu options.

Save settings.

Up arrow button

Scroll up.

Right arrow button

Scroll to the right.

Keypad

Enter numbers, letters, or symbols.

Sleep button

Enable Sleep mode or Hibernate mode.

The following actions wake the printer from Sleep mode:

•

A hard reset or a long press of the Sleep button wakes the

printer from Hibernate mode.

•

Pressing any hard button

•

Opening a tray or the front door

•

Sending a print job from the computer

•

Performing a power-on reset using the main power switch

•

Attaching a device in the USB port

USB port

Connect a flash drive to the printer.

Notes:

•

Only the front USB port supports flash drives.

•

ineo 4700P Only.

Stop or cancel button

Stop all printer activities.

Back button

Return to the previous screen.

Down arrow button

Scroll down.

Home button

Go to the home screen.

Indicator light

Check the status of the printer.

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands