Develop ineo 4000P Page 206 User Manual Download

Page: 206 / 217

User's Guide

- 206 -

Action

Yes

Step 1

From the Paper menu on the printer

control panel, check the paper type

and weight.

Do the paper type and texture match

the paper loaded in the tray?

Go to step 2.

Specify the paper type and weight

from the tray settings to match the

paper loaded in the tray.

Step 2

Check if you are printing on paper

with texture or rough finishes.

Are you printing on textured or rough

paper?

From the Paper menu on the printer

control panel, set the paper texture.

Contact

technical support

Uneven print density

Action

Yes

Replace the imaging unit, and then resend the print job.

Is the print density uneven?

Contact

technical support

. The problem is solved.

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands