Develop ineo 4000P Page 67 User Manual Download

Page: 67 / 217

User's Guide

- 67 -

Using the Embedded Web Server

1. Open a Web browser, and then type the printer IP address in the address field.

Notes:

- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address

appears as four sets of numbers separated by periods, such as 123.123.123.123.

- If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2. Click

Settings

General Settings

Schedule Power Modes

3. From the Action menu, select the power mode.

4. From the Time Source menu, select the time.

5. From the Day(s) menu, select the day or days.

6. Click

Add

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page

before restoring the factory default settings. For more information, see

Printing a menu settings page

If you want a more comprehensive method of restoring the printer factory default settings, then perform

the Wipe All Settings option. For more information, see

Erasing non-volatile memory

Warning—Potential Damage:

Restoring factory defaults returns most printer settings to the original

factory default settings. Exceptions include the display language, custom sizes and messages, and

network/port menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash

memory are not affected.

From the printer control panel, navigate to:

Settings

General Settings

Factory Defaults

Restore

Now

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands