Develop ineo 4000P Page 48 User Manual Download

Page: 48 / 217

User's Guide

- 48 -

2. Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.

3. Prepare the paper or specialty media for loading.

- Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the

paper. Straighten the edges on a level surface.

- Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them,

and then fan them. Straighten the edges on a level surface.

Note:

Avoid touching the printable side of the transparencies. Be careful not to scratch them.

- Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the

edges on a level surface.

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands