Develop ineo 4000P User Manual Download

Page: 129 / 217

User's Guide

- 129 -

Image menu

Use

Auto Fit

On
Off

Select the optimal paper size, scaling, and orientation.

Note:

On is the factory default setting. It overrides scaling and orientation

settings for some images.

Invert

On
Off

Invert bitonal monochrome images.

Notes:

•

Off is the factory default setting.

•

This setting does not apply to GIF or JPEG images.

Scaling

Anchor Top Left
Best Fit
Anchor Center
Fit Height/Width
Fit Height
Fit Width

Scale the image to fit the selected paper size.

Notes:

•

Best Fit is the factory default setting.

•

When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Orientation

Portrait
Landscape
Reverse Portrait
Reverse Landscape

Set the image orientation.

Note:

Portrait is the factory default setting.

Summary of Contents for ineo 4000P


























































































































































































































Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands

Develop ineo 4000P, User Manual

Search results

Summary of Contents for ineo 4000P

Reviews:

Related manuals for ineo 4000P

Brands by name

Popular brands