![Dentsply Sirona Sim Multi Bench Operating Instructions Manual Download Page 67](http://html1.mh-extra.com/html/dentsply-sirona/sim-multi-bench/sim-multi-bench_operating-instructions-manual_2483697067.webp)
Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
4 Operation
4.6 Operating light
66 82 384 D3684
D3684.201.01.02.02 07.2019
67
4.6.1
Switching the operating light on/off
Repeatedly pressing the
Operating light fixed key on the dentist element
can set the following conditions:
1.
Switched on: The operating light is switched on at the preset
brightness level.
2.
Composite function: The operating light is on at a reduced
brightness level to delay the curing of composite materials.
3.
Switched off
➢ Press the
Operating light fixed key on the dentist element, repeat if
necessary.
Ä
The operating light switches to "On", "Composite function" or
"Off".
A non-touch sensor is installed beneath the LEDview Plus and LEDlight
Plus operating light. This allows the operating light to be switched on/off
or to the composite function with a hand movement. With the LEDview
Plus, the sensor control can be switched on or off via the user interface
of the dentist element. Additionally, it is possible to set the distance at
which the non-touch sensor should react to movement. For details,
please see the operating instructions for the operating light.
4.6.2
Setting the LEDlight brightness
The operating light is always switched on at the programmed
brightness. With the LEDlight Plus, the brightness is programmed using
the contactless sensor. For details, please see the operating
instructions for the operating light.