Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
4 Operation
4.4 Dentist element
66 82 384 D3684
D3684.201.01.02.02 07.2019
45
4.4.4.1.4
Setting the amount of spray water
The amount of spray air or water is factory preset for the instruments.
This basic setting and the compressed air for the turbines can be
changed by the service technician.
The amount of spray water can be adjusted for each individual
instrument by the user. The amount of air remains constant. To do this,
rotating water controls are located under the instrument holder of the
dentist element.
If the control for an instrument is completely closed, the treatment site is
cooled only with air.
1.
Rotate the water knob on the respective instrument.
Reduce water quantity in spray: Turn knob clockwise to close
Increase water quantity if spray: Turn knob counterclockwise to
open
2.
Test the setting for spray water. Correct the setting if necessary.
