Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
4 Operation
4.4 Dentist element
66 82 384 D3684
D3684.201.01.02.02 07.2019
53
Saving the speed
ü
The desired speed is set.
ü
With the C+ electronic foot control: The spray is switched on or off
(also saved).
2
Setup
1.
Press and hold the favorite key
2 / Setup (> 2 s).
Ä
The speed flashes on the SIM display of the dentist element.
1
2
Setup
3
2.
Press the favorite key 1, 2, or 3.
Ä
An acoustic signal sounds. The set speed and if applicable,
activation of spray is saved on the favorite key.
A/B
While the speed is flashing on the SIM display of the dentist element,
saving on a favorite key can be canceled by pressing the
Counterclockwise rotation / user profile key.
4.4.7.3
Setting the direction of rotation
The direction of rotation can be changed only when the motor is at a
standstill.
Tip: After starting the electric motor with the foot switch, an audible
warning signal sounds 6 times if counterclockwise rotation is activated.
Via the user interface
ü
An electric motor is removed from the holder.
A/B
➢ Press the
Counterclockwise rotation / User profile key.
Ä
The
Counterclockwise rotation status display lights up when
counterclockwise rotation is set.
Via the C+ electronic foot control
The rotational direction of the motor can also be set via the 4-way foot
control plate of the C+ electronic foot switch.
S
0
ü
An electric motor is removed from the holder.
1.
Move the 4-way switch plate to the left.
Ä
When counterclockwise rotation is switched on, the status
display
counterclockwise rotation is lit on the user interface.
2.
Move the 4-way switch plate to the left again to reverse the
rotational direction.
