Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
4 Operation
4.4 Dentist element
66 82 384 D3684
D3684.201.01.02.02 07.2019
41
This function is to protect them from interference from HF fields, e.g.
from an external HF device, so that no functions are unintentionally
triggered during cleaning.
#
In clean mode, the customer-specific key remains active.
Timer function
Fn
A set time can be counted down to zero with the timer function.
The timer is preset in the setup of the simulation unit.
Starts, stops, and resets the timer.
ü
The time or speed/intensity are displayed on the SIM display of the
dentist element.
➢ Press the Fn key.
Ä
The timer starts immediately.
The preset time counts down on the SIM display of the dentist
element.
Ä
When the time is up, a short acoustic signal sounds.
Pressing the key again stops the timer and resets the timer setting. It
can then be restarted.
