manualshive.com logo in svg

Dentsply Sirona Sim Multi Bench, Operating Instructions Manual

Share
Download
Dentsply Sirona Sim Multi Bench Operating Instructions Manual Download Page 13

Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench

2 Safety instructions

2.12 User interface

66 82 384 D3684
D3684.201.01.02.02    07.2019

13

2.12

User interface

The dentist element of your simulation unit is equipped with a control
panel with seven-segment displays (dentist element SIM). 

2.13

Care, cleaning, and disinfecting agents

Unsuitable care and cleaning agents or disinfectants may corrode the
surface of the unit or impair its functioning.

Please therefore only use care, cleaning, and disinfecting agents
approved by the manufacturer. For more information, please refer to the
section "Care, cleaning agents, and disinfectants"  [→ 97].

NOTE

Approved care, cleaning, and disinfecting agents

Use only care, cleaning, and disinfecting agents approved by
Dentsply Sirona!

A continuously updated list of approved products can be obtained via
the Internet at 

"www.sirona.com". In the navigation bar, follow the menu

path 

"SERVICE" / "Technical Documentation" / "General documents"

and then open the document 

"Care, cleaning and disinfection agents".

If you do not have access to the Internet, please contact your customer
service center (see Sect. 1.2) to order the list (REF 59 70 905).

2.14

Wireless phone interference

To ensure safe operation of the unit, the use of possible wireless
phones (cell phones) must be prohibited in the operating area.

Summary of Contents for Sim Multi Bench





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands