Dell Precision WorkStation 210, User Manual

Page: 177 / 247

Hardware Configuration FeaturesB-13
/LQH2XW-DFN
The line-out jack (see Figure B- 10) can be used to attach most computer speakers.
The line-out jack is amplified, so speakers with integrated amplifiers are not required.
Connect the audio cable from the speakers to this jack.
.
)LJXUH%/LQH2XW-DFN
/LQH,Q-DFN
The line-in jack (see Figure B- 11) can be used to attach record/playback devices such
as cassette players, CD players, and VCRs. Connect the line-out cable from any of
these devices to the line-in jack on the back of your computer.
)LJXUH%/LQH,Q-DFN
,QWHUUXSW$VVLJQPHQWV
Problems can arise if two devices attempt to use the same IRQ line. To avoid this type
of conflict, check the documentation for the default IRQ line setting for each installed
device. Then consult Table B- 8 to configure each device for one of the available IRQ or
other lines.
NOTE: Interrupts for the on-board sound and NIC are assigned dynamically by the
system basic input/output system (BIOS).