Dell Precision WorkStation 210, User Manual

Page: 89 / 247

Using the ISA Configuration Utility4-13
5HPRYLQJD&DUG
Before you remove a non-Plug and Play ISA expansion card from your computer, you
must use the ICU to remove the card from the system configuration.
NOTE: When you remove a Plug and Play or PCI expansion card from your computer,
you do not need to run the ICU. To remove a Plug and Play or PCI expansion card,
complete steps 2 through 8 in “Removing an Expansion Card” in Chapter 8.
Use the following procedure to remove a non-Plug and Play ISA expansion card from
your computer:
1. Start the ICU as described in “Starting the ICU” found earlier in this chapter.
2. Select the card from the current system configuration list in the ICU window.
3. Select Remove Card from the Configuration menu, or click Remove .
The ICU requests verification that you want to remove the card.
4. Click Yes to free the resources allocated to the card and remove the card’s name
from the list of active cards, or click No to cancel the operation.
The ICU returns to the ICU window.
&$87,21$IWHUUHPRYLQJDFDUGIURPWKHV\VWHPFRQILJXUDWLRQXVLQJ
WKH,&8\RXPXVWWXUQRIIWKHV\VWHPDQGSK\VLFDOO\UHPRYHWKHFDUG
)DLOXUHWRGRVRFDQGDPDJH\RXUV\VWHP
5. Remove the non-Plug and Play ISA expansion card from the computer.
See “Removing an Expansion Card” in Chapter 8 for instructions.
9LHZLQJ5HVRXUFHV
The ICU displays all resources currently used by your system.
To view all system resources, select System Resources from the View menu or click
View . The System Resource Usage dialog box (see Figure 4-10) displays all
resources currently used by the system.
)LJXUH6\VWHP5HVRXUFH8VDJH'LDORJ%R[