manualshive.com logo in svg

Dell Precision WorkStation 210, User Manual

The Dell Precision WorkStation 210 offers powerful performance for professionals seeking a reliable and efficient workstation. Enhance your productivity with this reliable machine, and easily set up and operate it by downloading the free user manual from manualshive.com. Enjoy hassle-free access to essential information and instructions, empowering you to maximize the potential of your workstation.

Share
Download
background image

xxiii

Figure 7-3.

Replacing the Computer Cover  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-5

Figure 7-4.

Computer Orientation View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-6

Figure 7-5.

Inside the Chassis  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7

Figure 7-6.

Rotating the Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-8

Figure 8-1.

System Board Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-2

Figure 8-2.

Expansion Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-3

Figure 8-3.

Removing the Filler Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4

Figure 8-4.

Installing an Expansion Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5

Figure 8-5.

DIMMs and DIMM Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-7

Figure 8-6.

Installing a DIMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9

Figure 8-7.

Removing a DIMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9

Figure 8-8.

SEC Cartridge/Heat Sink Assembly Removal  . . . . . . . . . . . . . . . . .  8-11

Figure 8-9.

System Battery and Battery Socket . . . . . . . . . . . . . . . . . . . . . . . . .  8-14

Figure 9-1.

Drive Locations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-2

Figure 9-2.

Removing the Front Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-3

Figure 9-3.

Removing the Front-Panel Insert for a 5.25-Inch Bay  . . . . . . . . . . . .  9-4

Figure 9-4.

DC Power Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-4

Figure 9-5.

Drive Interface Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5

Figure 9-6.

Removing a Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-7

Figure 9-7.

Attaching the Drive Bracket to the New Drive . . . . . . . . . . . . . . . . . .  9-7

Figure 9-8.

Inserting the New Drive Into the Drive Bay . . . . . . . . . . . . . . . . . . . .  9-8

Figure 9-9.

Attaching EIDE Tape Drive Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-9

Figure 9-10. Removing the Hard-Disk Drive Bracket . . . . . . . . . . . . . . . . . . . . . .  9-12
Figure 9-11. Inserting a 1-Inch Hard-Disk Drive Into the Bracket . . . . . . . . . . . . .  9-13
Figure 9-12. Inserting the Hard-Disk Drive Bracket Into the Chassis . . . . . . . . . .  9-14
Figure 9-13. Attaching Hard-Disk Drive Cables  . . . . . . . . . . . . . . . . . . . . . . . . . .  9-15
Figure 9-14. Internal SCSI Cables  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-18
Figure B-1. System Board Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Figure B-2. I/O Ports and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
Figure B-3. Pin Numbers for the Serial Port Connectors  . . . . . . . . . . . . . . . . . . . B-7
Figure B-4. Pin Numbers for the Parallel Port Connector . . . . . . . . . . . . . . . . . . . B-8
Figure B-5. Pin Numbers for the Keyboard Connector . . . . . . . . . . . . . . . . . . . . . B-9
Figure B-6. Pin Numbers for the Mouse Connector . . . . . . . . . . . . . . . . . . . . . . B-10
Figure B-7. NIC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11
Figure B-8. Pin Numbers for the USB Connectors . . . . . . . . . . . . . . . . . . . . . . . B-12
Figure B-9. Microphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12
Figure B-10. Line-Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-13
Figure B-11. Line-In Jack  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-13
Figure E-1. VCCI Class A ITE Regulatory Mark  . . . . . . . . . . . . . . . . . . . . . . . . . .  E-6
Figure E-2. VCCI Class B ITE Regulatory Mark  . . . . . . . . . . . . . . . . . . . . . . . . . .  E-6

Summary of Contents for Precision WorkStation 210
























































































































































































































































Reviews:

No comments

Related manuals for Precision WorkStation 210

XtendLan RB-851 User Manual preview
RB-851
Brand: XtendLan Pages: 17
OEM Tools 24616 Operating Instructions And Parts Manual preview
24616
Brand: OEM Tools Pages: 4
ASROCK DESKMINI SERIES User Manual preview
DESKMINI SERIES
Brand: ASROCK Pages: 70
Aplex ACS-2645 User Manual preview
ACS-2645
Brand: Aplex Pages: 69
Toshiba Infinia 7260 Specification Sheet preview
Infinia 7260
Brand: Toshiba Pages: 5
Toshiba Infinia 7230 Specification Sheet preview
Infinia 7230
Brand: Toshiba Pages: 5
Toshiba Infinia 7231 Specification Sheet preview
Infinia 7231
Brand: Toshiba Pages: 5
Toshiba Infinia 7202 Specification Sheet preview
Infinia 7202
Brand: Toshiba Pages: 5
Toshiba Infinia 7201 Specification Sheet preview
Infinia 7201
Brand: Toshiba Pages: 5
Toshiba Infinia 7200 Specification Sheet preview
Infinia 7200
Brand: Toshiba Pages: 4
Toshiba Equium 8000S Specification Sheet preview
Equium 8000S
Brand: Toshiba Pages: 1
Toshiba Infinia 7160 Specification Sheet preview
Infinia 7160
Brand: Toshiba Pages: 4
Toshiba Infinia 7161 Specification Sheet preview
Infinia 7161
Brand: Toshiba Pages: 5
Toshiba Equium 7350D Specification Sheet preview
Equium 7350D
Brand: Toshiba Pages: 2
Toshiba Equium 7300S SERIES Specification Sheet preview
Equium 7300S SERIES
Brand: Toshiba Pages: 4
Toshiba Equium 7300D Specification Sheet preview
Equium 7300D
Brand: Toshiba Pages: 4
Toshiba Equium 7100M Specification Sheet preview
Equium 7100M
Brand: Toshiba Pages: 4
Toshiba Equium 7000S Specification Sheet preview
Equium 7000S
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands