manualshive.com logo in svg

Dell Precision WorkStation 210, User Manual

The Dell Precision WorkStation 210 offers powerful performance for professionals seeking a reliable and efficient workstation. Enhance your productivity with this reliable machine, and easily set up and operate it by downloading the free user manual from manualshive.com. Enjoy hassle-free access to essential information and instructions, empowering you to maximize the potential of your workstation.

Share
Download
background image

Using the Integrated Audio Controller 6-3

synthesizer or other musical instrument, you must install a MIDI-compatible 

expansion card. (For instructions, see “Installing an Expansion Card” in Chapter  8.) If 

you use a MIDI card, set 

Sound

 in the System Setup program to 

Off

. (See Chapter 3, 

“Using the System Setup Program,” for information on changing System Setup 

settings.) 

To use a joystick, install a joystick-compatible expansion card in your computer. (For 

instructions, see “Installing an Expansion Card” in Chapter  8.) If you use a joystick 

card with sound capabilities, set 

Sound

 in the System Setup program to 

Off

. (See 

Chapter 3, “Using the System Setup Program,” for information on changing System 

Setup settings.) 

$GMXVWLQJ9ROXPH

Use the instructions in one of the following subsections to adjust the speaker balance 

and volume of an audio source that uses the integrated audio controller in your Dell 

computer.

$GMXVWLQJ9ROXPHLQ:LQGRZV

Use the following procedure to adjust the speaker or headphone volume in the 

Windows 95 operating system:

1.

Click the 

Start

 button, point to 

Settings

, and click 

Control Panel

.

2. Double-click the 

Multimedia

 icon.

3. Click the 

Audio

 tab, and move the slide switch for playback or recording to the 

desired volume.

For detailed instructions on adjusting the volume, see your Windows 95 

documentation.

$GMXVWLQJ9ROXPHLQ:LQGRZV

Use the following procedure to adjust the speaker or headphone volume in the 

Windows 98 operating system:

1.

Click the 

Start

 button, point to 

Settings

, and click 

Control Panel

.

2. Double-click the 

Multimedia

 icon.

3. Click the 

Audio

 tab, and move the slide switch for playback or recording to the 

desired volume.

a. Click the 

Playback

 icon, move the slide switches for playback to the desired 

volume, and then click 

OK

.

b. Click the 

Record

 icon, move the slide switches for record to the desired 

volume, and then click 

OK

.

For detailed instructions on adjusting the volume, see your Windows 98 

documentation.

Summary of Contents for Precision WorkStation 210
























































































































































































































































Reviews:

No comments

Related manuals for Precision WorkStation 210

DIVERSIFIED WOODCRAFTS 2810K Series Assembly Instructions Manual preview
2810K Series
Brand: DIVERSIFIED WOODCRAFTS Pages: 18
Advantech USC-250 User Manual preview
USC-250
Brand: Advantech Pages: 50
IBASE Technology CMI222 User Manual preview
CMI222
Brand: IBASE Technology Pages: 22
Compaq SR5605F - Presario - 1 GB RAM Quick Setup preview
SR5605F - Presario - 1 GB RAM
Brand: Compaq Pages: 1
Clarke CWB1830S Assembly Instructions preview
CWB1830S
Brand: Clarke Pages: 4
MSI 915 Software Manual preview
915
Brand: MSI Pages: 1
MSI AE202 User Manual preview
AE202
Brand: MSI Pages: 41
Sony BZMA-E555 Installation Manual preview
BZMA-E555
Brand: Sony Pages: 11
Sony MSX2 HB-F9P Hit Bit Operating Instructions Manual preview
MSX2 HB-F9P Hit Bit
Brand: Sony Pages: 23
Sony MSX 2 HB-F9P Operating Instructions Manual preview
MSX 2 HB-F9P
Brand: Sony Pages: 23
Sony HB-F9P Operating Instructions Manual preview
HB-F9P
Brand: Sony Pages: 23
Sony eVilla NTE-D101 User Manual preview
eVilla NTE-D101
Brand: Sony Pages: 41
Sony Cyber-shot DSC-T50 Service Manual preview
Cyber-shot DSC-T50
Brand: Sony Pages: 43
Sony BKNE-1010 Maintenance Manual preview
BKNE-1010
Brand: Sony Pages: 72
Sony Cyber-shot DSC-T50 Handbook preview
Cyber-shot DSC-T50
Brand: Sony Pages: 120
Sony ICD VGN-UX200 User Manual preview
ICD VGN-UX200
Brand: Sony Pages: 194
Sony Vaio VGC-JS410F/S Specifications preview
Vaio VGC-JS410F/S
Brand: Sony Pages: 2
Sony VAIO VGC-JS320JS Specifications preview
VAIO VGC-JS320JS
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands