Dell Precision WorkStation 210, User Manual

Page: 110 / 247

6-6 Dell Precision WorkStation 210 Mini Tower Systems User’s Guide
$XGLR'ULYHUVIRU:LQGRZV
To reinstall the audio drivers for Windows 98, you must first remove the old drivers
and then install the new drivers. Follow these steps:
1. Use the Program Diskette Maker (located in the Dell Accessories folder) to make
a diskette copy of the audio drivers installed on your hard-disk drive.
2. Start the Windows 98 operating system.
3. Insert the Windows 98 audio drivers diskette into drive A.
4. Click the Start button and click Run . Type
a:\setup
in the dialog box and click
OK .
5. When the Crystal Semiconductor window appears, click Install Driver .
The drivers are installed and a message appears prompting you to restart the
system.
6. Remove the audio drivers diskette from drive A, and click Restart .
7. After Windows 98 restarts, insert the audio drivers diskette into drive A and click
Next at the Add New Hardware Wizard window.
The system finds the following driver:
Crystal PnP Audio System CODEC
8. Click Next .
9. Verify that Floppy Disk Drives has a check mark in the box next to it.
10. Click Next .
11. Verify that The Updated Driver (Recommended) is selected.
12. Click Next , and click Next again.
13. Click Finish .
The audio driver files are copied to your system and you are returned to
Windows 98.