manualshive.com logo in svg

Dell Precision WorkStation 210, User Manual

The Dell Precision WorkStation 210 offers powerful performance for professionals seeking a reliable and efficient workstation. Enhance your productivity with this reliable machine, and easily set up and operate it by downloading the free user manual from manualshive.com. Enjoy hassle-free access to essential information and instructions, empowering you to maximize the potential of your workstation.

Share
Download
background image

xxvii

Figure 1-1.

Dell OpenManage Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-5

Figure 1-2.

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-12

Figure 1-3.

Security Cable Slot and Padlock Ring  . . . . . . . . . . . . . . . . . . . . . . .  1-13

Figure 3-1.

System Setup Screens  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5

Figure 3-2.

Sample Device List Screen  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-13

Figure 4-1.

ICU Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5

Figure 4-2.

Add Network Card Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6

Figure 4-3.

Card Configuration Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7

Figure 4-4.

Configuration Settings Dialog Box for Assigning an IRQ Line . . . . . .  4-7

Figure 4-5.

Available Settings List Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Figure 4-6.

Configuration Settings Dialog Box for Assigning a DMA Channel . . . 4-8

Figure 4-7.

Specify Interrupt Dialog Box  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Figure 4-8.

Specify Interrupt List Box  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Figure 4-9.

Specify I/O Port Dialog Box  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Figure 4-10. System Resource Usage Dialog Box . . . . . . . . . . . . . . . . . . . . . . . .  4-13
Figure 4-11. Card Resource Usage Dialog Box  . . . . . . . . . . . . . . . . . . . . . . . . . .  4-14
Figure 5-1.

NIC Connector and Indicators  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2

Figure 5-2.

NIC Pop-up Window  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-6

Figure 6-1.

Audio Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1

Figure 7-1.

Padlock Installed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3

Figure 7-2.

Removing the Computer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-4

Figure 7-3.

Replacing the Computer Cover  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-5

Figure 7-4.

Computer Orientation View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-6

Figure 7-5.

Inside the Chassis                                               . . . . . . . . . . . . . . . .  7-7

Figure 7-6.

Rotating the Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-8

Figure 8-1.

System Board Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-2

Figure 8-2.

Expansion Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-3

Figure 8-3.

Removing the Filler Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-4

Figure 8-4.

Installing an Expansion Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-5

Figure 8-5.

DIMMs and DIMM Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-7

Figure 8-6.

Installing a DIMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9

Figure 8-7.

Removing a DIMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-9

Figure 8-8.

SEC Cartridge/Heat Sink Assembly Removal  . . . . . . . . . . . . . . . . .  8-11

Figure 8-9.

System Battery and Battery Socket . . . . . . . . . . . . . . . . . . . . . . . . .  8-14

Figure 9-1.

Drive Locations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-2

Figure 9-2.

Removing the Front Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-3

Figure 9-3.

Removing the Front-Panel Insert for a 5.25-Inch Bay  . . . . . . . . . . . .  9-4

Figure 9-4.

DC Power Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-4

Figure 9-5.

Drive Interface Connectors        . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5

Figure 9-6.

Removing a Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-7

Figure 9-7.

Attaching the Drive Bracket to the New Drive . . . . . . . . . . . . . . . . . .  9-7

Figure 9-8.

Inserting the New Drive Into the Drive Bay . . . . . . . . . . . . . . . . . . . .  9-8

Figure 9-9.

Attaching EIDE Tape Drive Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-9

Summary of Contents for Precision WorkStation 210
























































































































































































































































Reviews:

No comments

Related manuals for Precision WorkStation 210

Panasonic CF-51 Series Supplementary Instructions Manual preview
CF-51 Series
Brand: Panasonic Pages: 12
Panasonic CF-30 Series Supplementary Instructions Manual preview
CF-30 Series
Brand: Panasonic Pages: 16
Panasonic CF-17 Operating Instructions Manual preview
CF-17
Brand: Panasonic Pages: 28
Panasonic CF-07 Series Reference Manual preview
CF-07 Series
Brand: Panasonic Pages: 43
Gateway E-1200 User Manual preview
E-1200
Brand: Gateway Pages: 42
Compaq 27-n200nl Upgrading And Servicing Manual preview
27-n200nl
Brand: Compaq Pages: 18
Gigabyte GB-AEDNK User Manual preview
GB-AEDNK
Brand: Gigabyte Pages: 34
S&T Kontron KBox E-410-APL User Manual preview
Kontron KBox E-410-APL
Brand: S&T Pages: 78
AXIOMTEK GOT-5840TL User Manual preview
GOT-5840TL
Brand: AXIOMTEK Pages: 64
Moxa Technologies W406 Series User Manual preview
W406 Series
Brand: Moxa Technologies Pages: 27
Magic MWS 8840 User Manual preview
MWS 8840
Brand: Magic Pages: 19
DFI RM641-HD User Manual preview
RM641-HD
Brand: DFI Pages: 69
Aaeon BOXER-64 Series Manual preview
BOXER-64 Series
Brand: Aaeon Pages: 90
NEC POWERMATE ENTERPRISE - 10-1997 Manual preview
POWERMATE ENTERPRISE - 10-1997
Brand: NEC Pages: 270
S&T Kontron KWS 3000-CML User Manual preview
Kontron KWS 3000-CML
Brand: S&T Pages: 58
Asus A31CD User Manual preview
A31CD
Brand: Asus Pages: 54
Asus A44 Series User Manual preview
A44 Series
Brand: Asus Pages: 70
Asus AAEON BOXER-6710 User Manual preview
AAEON BOXER-6710
Brand: Asus Pages: 75

Brands by name

Popular brands

Load more brands