Dell Precision WorkStation 210, User Manual

Page: 134 / 247

8-14 Dell Precision WorkStation 210 Mini Tower Systems User’s Guide
3. To access the battery on the system board, rotate the power supply as described
in “Rotating the Power Supply Away From the System Board” in Chapter 7.
NOTE: If a CD-ROM drive or hard-disk drive in the upper 5.25-inch drive bay
obstructs your access to the battery, you may find it helpful to slide the drive
forward slightly to provide more room for you to work. See the section in
Chapter 9 titled “Installing a Drive in a 5.25-Inch Drive Bay” for instructions.
4. Locate the battery and remove it.
The battery is mounted in a socket labeled “BATTERY” at the upper front-right
corner of the system board (as you face the side of the system) (see Figure 8-1).
&$87,21,I\RXSU\WKHEDWWHU\RXWRILWVVRFNHWZLWKDEOXQWREMHFWEH
FDUHIXOQRWWRWRXFKWKHV\VWHPERDUGZLWKWKHREMHFW0DNHFHUWDLQWKDW
WKHREMHFWLVLQVHUWHGEHWZHHQWKHEDWWHU\DQGWKHVRFNHWEHIRUH
DWWHPSWLQJWRSU\RXWWKHEDWWHU\2WKHUZLVH\RXPD\GDPDJHWKH
V\VWHPERDUGE\SU\LQJRIIWKHVRFNHWRUE\EUHDNLQJFLUFXLWWUDFHVRQ
WKHV\VWHPERDUG
Pry the battery out of its socket with your fingers or with a blunt, nonconductive
object, such as a plastic screwdriver (see Figure 8-9).
)LJXUH6\VWHP%DWWHU\DQG%DWWHU\6RFNHW
5. Install the new battery.
Orient the battery with the side labeled “+” facing up. Then insert the battery
into the socket, and snap it into place.
6. Rotate the power supply back into position, making sure that the securing tab
snaps into place.
BATTERY socket
battery