Dell Precision WorkStation 210, User Manual

Page: 102 / 247

5-10 Dell Precision WorkStation 210 Mini Tower Systems User’s Guide
4. Start the Windows 98 operating system.
5. Click the Start button, point to Settings , and click Control Panel . Then
double-click the System icon.
6. In the System Properties window, click the Device Manager tab.
7. Click Other Devices .
8. Click PCI Ethernet Controller , and then click Remove . When prompted to
remove the device, click OK .
9. In the System Properties window, click Close .
10. In the Control Panel , double-click Network .
11. Click any devices listed in the Configuration window, and then click Remove .
12. Click Add , click Adapter in the Configuration window, and then click Add again.
13. Insert the NIC driver diskette 2 into drive A.
14. In the Select Network Adapters window, click Have Disk .
15. In the Install From Disk window, enter
a:\
under Copy Manufacturer’s Files
From , and then click OK .
16. In the Select Network Adapter window, click 3Com Fast Etherlink XL
10/100Mb TX Ethernet NIC (3C905B-TX) , and then click OK .
A notification pop-up window tells you that you have installed a Plug and Play
adapter and that you must turn off the system and install the adapter. Your NIC is
already integrated on the system board. Do not turn off the system at this time.
17. Click OK in the notification pop-up window.
18. At the empty Network window, click OK .
19. After the files have finished copying, close the Control Panel , click the Start
button, and click Shut Down . When the Shut Down window appears, click
Shut down and then click OK .
20. After the system turns off, remove the NIC driver diskette from drive A, wait
10 seconds, and then press the power button.
21. When the Windows 98 logo screen appears, reinsert NIC driver diskette 2 into
drive A.
The system detects a PCI Ethernet controller.
22. At the Add New Hardware Wizard window, click Next .
23. When prompted to search for a driver, click Next .