Dell M1330 - XPS - Core 2 Duo 1.83 GHz, Owner'S Manual

Page: 89 / 202

Troubleshooting
89
Starting the Dell Diagnostics From the Drivers and Utilities Media
1
Insert your Drivers and Utilities media.
2
Shut down and restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE:
If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
®
Windows
®
desktop; then, shut down your
computer and try again.
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
NOTE:
Keyboard failure may result when a key on the keyboard is held down
for extended periods of time. To avoid possible keyboard failure, press and
release the <F12> key in even intervals until the boot device menu appears.
3
At the boot device menu, use the up- and down-arrow keys to highlight
CD/DVD/CD-RW , and then press <Enter>.
NOTE:
The Quickboot feature changes the boot sequence for the current
boot only. Upon restart, the computer boots according to the boot sequence
specified in the system setup program.
4
Select the Boot from CD-ROM option from the menu that appears, and
then press <Enter>.
5
Type
1
to start the Drivers and Utilities menu, and then press <Enter>.
6
Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
computer.
7
At the Dell Diagnostics Main Menu , select the test you want to run.
NOTE:
Write down any error codes and problem descriptions exactly as they
appear and follow the instructions on the screen.
8
After all tests have completed, close the test window to return to the Dell
Diagnostics
Main Menu .
9
Remove your Drivers and Utilities media, and then close the Main Menu
window to exit the Dell Diagnostics and restart the computer.
book.book Page 89 Tuesday, October 7, 2008 6:00 PM