Dell Inspiron 1000 Owner'S Manual Download Page 22

Page: 22 / 210

About Your Computer

If the computer is connected to an electrical outlet, the

light operates as

follows:

•

Solid green: The battery is charging.

•

Flashing green: The battery is almost fully charged.

If the computer is running on a battery, the

light operates as follows:

•

Off: The battery is adequately charged (or the computer is turned off).

•

Flashing orange: The battery charge is low.

•

Solid orange: The battery charge is critically low.

TOUCH

PAD

—

Provides the functionality of a mouse. Silk screening on the touch pad

indicates scrolling capabilities.

SPEAKERS

—

To adjust the volume of the integrated speakers, press the media

control buttons or speaker-volume keyboard shortcuts. For more information, see
"Speaker Functions" on page 49.

TOUCH

PAD

BUTTONS

—

Touch pad buttons provide the functionality of a mouse.

KEYBOARD

—

The keyboard includes a numeric keypad as well as the Microsoft

Windows logo key. For information on supported keyboard shortcuts, see "Key
Combinations" on page 48.

book.book Page 22 Friday, October 19, 2007 2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Search results

Summary of Contents for Inspiron 1000

Reviews:

Related manuals for Inspiron 1000

Brands by name

Popular brands

Dell Inspiron 1000, Owner'S Manual

Search results

Summary of Contents for Inspiron 1000

Reviews:

Related manuals for Inspiron 1000

Brands by name

Popular brands