manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual, Page: 72 / 210

Share
Download
Dell Inspiron 1000 Owner'S Manual Download Page 72

72

Using Cards

Media Memory Cards 

The 3-in-1 media memory card reader provides a fast and convenient way to 
view and share digital photos, music, and videos stored on a media memory 
card. 

 

NOTE: 

A media memory card is not a bootable device.

The 3-in-1 media memory card reader 

reads 

Secure Digital (SD) card/SDIO 

and MultiMediaCard (MMC) 

media memory cards.

Installing a Media Memory Card

You can install a media memory card in the computer while the computer is 
running. The computer automatically detects the card.

Media memory cards are generally marked with a symbol (such as a triangle or 
an arrow) or a label to indicate which end to insert into the slot. The cards are 
keyed to prevent incorrect insertion. If card orientation is not clear, see the 
documentation that came with the card. 

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

To install a media memory card:

1

Hold the card with the top side of the card facing up. 

2

Slide the card into the slot until the card is completely seated in its 
connector. 

If you encounter too much resistance, do not force the card. Check the 
card orientation and try again.

 

book.book  Page 72  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments