manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual, Page: 197 / 210

Share
Download
Dell Inspiron 1000 Owner'S Manual Download Page 197

Glossary

197

S

SAS

 — serial attached SCSI — A faster, serial version of the SCSI interface (as 

opposed to the original SCSI parallel architecture).

SATA

 — serial ATA — A faster, serial version of the ATA (IDE) interface.

ScanDisk

 — A Microsoft utility that checks files, folders, and the hard disk’s surface 

for errors. ScanDisk often runs when you restart the computer after it has stopped 
responding.

SCSI

 — small computer system interface — A high-speed interface used to connect 

devices to a computer, such as hard drives, CD drives, printers, and scanners. The 
SCSI can connect many devices using a single controller. Each device is accessed by an 
individual identification number on the SCSI controller bus.

SDRAM

 — synchronous dynamic random-access memory — A type of DRAM that is 

synchronized with the optimal clock speed of the processor.

serial connector

 — An I/O port often used to connect devices such as a handheld 

digital device or digital camera to your computer.

Service Tag

 — A bar code label on your computer that identifies your computer when 

you access Dell Support at 

support.dell.com

 or when you call Dell for customer service 

or technical support.

setup program

 — A program that is used to install and configure hardware and 

software. The 

setup.exe

 or 

install.exe

 program comes with most Windows software 

packages. 

Setup program

 differs from 

system setup

.

shortcut

 — An icon that provides quick access to frequently used programs, files, 

folders, and drives. When you place a shortcut on your Windows desktop and double-
click the icon, you can open its corresponding folder or file without having to find it 
first. Shortcut icons do not change the location of files. If you delete a shortcut, the 
original file is not affected. Also, you can rename a shortcut icon.

SIM 

— Subscriber Identity Module — A SIM card contains a microchip that encrypts 

voice and data transmissions. SIM cards can be used in phones or portable computers.

smart card

 — A card that is embedded with a processor and a memory chip. Smart 

cards can be used to authenticate a user on computers equipped for smart cards.

S/PDIF

 — Sony/Philips Digital Interface — An audio transfer file format that allows 

the transfer of audio from one file to another without converting it to and from an 
analog format, which could degrade the quality of the file.

standby mode

 — A power management mode that shuts down all unnecessary 

computer operations to save energy.

book.book  Page 197  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments