manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual

The Dell Inspiron 1000 Owner's Manual is the perfect companion for users of this remarkable laptop. Packed with valuable information, this comprehensive manual provides step-by-step instructions on setup, troubleshooting, and maintenance. Download it for free at manualshive.com, empowering yourself with indispensable knowledge for your Dell Inspiron 1000.

Share
Download
background image

42

Using the Display

You can enhance the legibility of text and change the appearance of images 
on the screen by adjusting display resolution. As you increase resolution, 
items appear smaller on the screen. In contrast, lower resolution causes text 
and images to appear larger and can benefit people with vision impairments. 
To display a program at a specific resolution, both the video card and the 
display must support the program, and the necessary video drivers must be 
installed.

 

NOTE: 

Use only the Dell-installed video drivers, which are designed to offer the 

best performance with your Dell-installed operating system.

If you choose a resolution or color palette that is higher than the display 
supports, the settings adjust automatically to the closest supported values.

To set the display resolution and refresh rate for your display, perform the 
steps in the following section that corresponds to the operating system your 
computer is using.

Microsoft

®

 Windows

®

 XP

1

Click 

Start

→

 

Settings

→

 

Control Panel

.

2

Under 

Pick a category

, click 

Appearance and Themes

.

3

Under 

Pick a task…

, click the area you want to change, or under 

or pick a 

Control Panel icon

, click 

Display

.

4

In the 

Display Properties

 window, click the 

Settings

 tab.

5

Try different settings for 

Color quality 

and 

Screen resolution

. 

 

NOTE: 

As the resolution increases, icons and text appear smaller on the screen.

Windows Vista

®

1

Click the Windows Vista Start button 

, and click 

Control Panel

.

2

Under 

Appearance and Personalization

, click 

Adjust screen resolution

.

3

In the 

Display Settings

 window, under 

Resolution

, slide the slide bar to 

the left/right to decrease/increase the screen resolution.

4

Click 

How do I get the best display?

 for further instructions. 

If the video resolution setting is higher than that supported by the display, the 
computer enters pan mode. In pan mode, the entire video image cannot be 
displayed at one time, and the taskbar that usually appears at the bottom of 

book.book  Page 42  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments

Related manuals for Inspiron 1000

IBM 610 Manual Of Operation preview
610
Brand: IBM Pages: 66
Gateway GT5062b User Manual preview
GT5062b
Brand: Gateway Pages: 96
Compal U-BPC User Manual preview
U-BPC
Brand: Compal Pages: 57
Radio Shack TRS-80 Model 100 Basic Manual preview
TRS-80 Model 100
Brand: Radio Shack Pages: 210
Advantech ARK-5280 Series User Manual preview
ARK-5280 Series
Brand: Advantech Pages: 88
IBASE Technology CMI222 User Manual preview
CMI222
Brand: IBASE Technology Pages: 22
Compaq SR5605F - Presario - 1 GB RAM Quick Setup preview
SR5605F - Presario - 1 GB RAM
Brand: Compaq Pages: 1
Vizio All-in-One Touch PC Quick Start Manual preview
All-in-One Touch PC
Brand: Vizio Pages: 40
Workrite Solace Sit-to-Stand Premium Assembly/Installation Instructions preview
Solace Sit-to-Stand Premium
Brand: Workrite Pages: 2
Jesco TOPAX DX Operation & Maintenance Instructions Manual preview
TOPAX DX
Brand: Jesco Pages: 56
HP 450 NG User Manual preview
450 NG
Brand: HP Pages: 50
HP 3350 - Cisco NAC Appliance Support Manual preview
3350 - Cisco NAC Appliance
Brand: HP Pages: 18
HP 290 G2 MT Business Product End-Of-Life Disassembly Instructions preview
290 G2 MT Business
Brand: HP Pages: 7
HP 5/xx Introduction Manual preview
5/xx
Brand: HP Pages: 77
HP 299300-006 - Professional - 5100 Safety And Regulatory Information Manual preview
299300-006 - Professional - 5100
Brand: HP Pages: 32
HP 330 Service Handbook preview
330
Brand: HP Pages: 94
HP 406 G1 MT Disassembly Instructions Manual preview
406 G1 MT
Brand: HP Pages: 12
HP 6080 - Pro Microtower PC Illustrated Parts & Service Map preview
6080 - Pro Microtower PC
Brand: HP Pages: 4

Brands by name

Popular brands

Load more brands