manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual

The Dell Inspiron 1000 Owner's Manual is the perfect companion for users of this remarkable laptop. Packed with valuable information, this comprehensive manual provides step-by-step instructions on setup, troubleshooting, and maintenance. Download it for free at manualshive.com, empowering yourself with indispensable knowledge for your Dell Inspiron 1000.

Share
Download
background image

Using the Keyboard and Touch Pad

47

Using the Keyboard and Touch Pad

Numeric Keypad

The numeric keypad functions like the numeric keypad on an external 
keyboard. Each key on the keypad has multiple functions. The keypad 
numbers and symbols are marked in blue on the right of the keypad keys. To 
type a number or symbol, press <Fn> and the desired key after enabling the 
keypad.

•

To enable the keypad, press <Fn><Num Lk>. The 

 light indicates 

that the keypad is active.

•

To disable the keypad, press <Fn><Num Lk> again. 

9

book.book  Page 47  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments

Related manuals for Inspiron 1000

Layher 3201 Instructions For Assembly And Use preview
3201
Brand: Layher Pages: 6
IBM IntelliStation Z Pro 6221 Installation Manual preview
IntelliStation Z Pro 6221
Brand: IBM Pages: 110
S&T embedded Rail-PC-5101 User Manual preview
Rail-PC-5101
Brand: S&T embedded Pages: 23
IBM IntelliStation POWER 9114 Model 275 Manual To The Installation preview
IntelliStation POWER 9114 Model 275
Brand: IBM Pages: 92
Elo Touch Solutions EloPOS 15'' Series User Manual preview
EloPOS 15'' Series
Brand: Elo Touch Solutions Pages: 39
Go!Paint FlowControl FC-S01 Original Operating Manual preview
FlowControl FC-S01
Brand: Go!Paint Pages: 20
DT Research DT166LX Basic Operation Manual preview
DT166LX
Brand: DT Research Pages: 2
Vivo DESK-V000U Instruction Manual preview
DESK-V000U
Brand: Vivo Pages: 3
Foxconn nT-270 User Manual preview
nT-270
Brand: Foxconn Pages: 35
Fanvil i16V Quick Installation Manual preview
i16V
Brand: Fanvil Pages: 6
Lucas Control Systems Deeco EM-C061 User Manual preview
Deeco EM-C061
Brand: Lucas Control Systems Pages: 57
Corvus systems Concept User Manual preview
Concept
Brand: Corvus systems Pages: 191
Axon P7900 User Manual preview
P7900
Brand: Axon Pages: 51
Wincor Nixdorf BEETLE /M-II Technical Information preview
BEETLE /M-II
Brand: Wincor Nixdorf Pages: 19
VarTech Systems VTPC150VHBR User Manual preview
VTPC150VHBR
Brand: VarTech Systems Pages: 8
Ergotron WorkFit-P Manual preview
WorkFit-P
Brand: Ergotron Pages: 9
AST Premmia GX Series User Manual preview
Premmia GX Series
Brand: AST Pages: 88
Aaeon FES-6110 User Manual preview
FES-6110
Brand: Aaeon Pages: 52

Brands by name

Popular brands

Load more brands