manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual, Page: 24 / 210

Share
Download
Dell Inspiron 1000 Owner'S Manual Download Page 24

24

About Your Computer

Left Side View 

 

CAUTION: 

Do not block, push objects into, or allow dust to accumulate in the air 

vents. Do not store your computer in a low-airflow environment, such as a closed 
briefcase, while it is running. Restricting the airflow can damage the computer or 
cause a fire.

AIR

 

VENT

—

The computer uses fans to create airflow through the vents, which 

prevents the computer from overheating.

 

NOTICE: 

Before you buy an antitheft device, ensure that it will work with the 

security cable slot.

SECURITY

 

CABLE

 

SLOT

—

Lets you attach a commercially available antitheft device 

to the computer. For more information, see the instructions included with the device.

1

air vent

2

security cable slot

3

optical drive bay

4

optical-drive-tray eject 
button

3

2

4

1

book.book  Page 24  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments