manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual, Page: 189 / 210

Share
Download
Dell Inspiron 1000 Owner'S Manual Download Page 189

Glossary

189

DVD-R

 — DVD recordable — A recordable version of a DVD. Data can be recorded 

only once onto a DVD-R. Once recorded, the data cannot be erased or written over.

DVD+RW

 — DVD rewritable — A rewritable version of a DVD. Data can be written 

to a DVD+RW disc, and then erased and written over (rewritten). (DVD+RW 
technology is different from DVD-RW technology.)

DVD+RW drive

 — drive that can read DVDs and most CD media and write to 

DVD+RW (rewritable DVDs) discs.

DVI

 — digital video interface — A standard for digital transmission between a 

computer and a digital video display.

E

ECC

 — error checking and correction — A type of memory that includes special 

circuitry for testing the accuracy of data as it passes in and out of memory.

ECP

 — extended capabilities port — A parallel connector design that provides 

improved bidirectional data transmission. Similar to EPP, ECP uses direct memory 
access to transfer data and often improves performance.

EIDE 

— enhanced integrated device electronics — An improved version of the IDE 

interface for hard drives and CD drives.

EMI

 — electromagnetic interference — Electrical interference caused by 

electromagnetic radiation.

ENERGY STAR

®

 — Environmental Protection Agency requirements that decrease 

the overall consumption of electricity.

EPP

 — enhanced parallel port — A parallel connector design that provides 

bidirectional data transmission.

ESD

 — electrostatic discharge — A rapid discharge of static electricity. ESD can 

damage integrated circuits found in computer and communications equipment.

expansion card

 — A circuit board that installs in an expansion slot on the system 

board in some computers, expanding the capabilities of the computer. Examples 
include video, modem, and sound cards.

expansion slot

 — A connector on the system board (in some computers) where you 

insert an expansion card, connecting it to the system bus.

ExpressCard

 — A removable I/O card adhering to the PCMCIA standard. Modems 

and network adapters are common types of ExpressCards. ExpressCards support both 
the PCI Express and USB 2.0 standard.

book.book  Page 189  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments