manualshive.com logo in svg

Dell Inspiron 1000, Owner'S Manual

The Dell Inspiron 1000 Owner's Manual is the perfect companion for users of this remarkable laptop. Packed with valuable information, this comprehensive manual provides step-by-step instructions on setup, troubleshooting, and maintenance. Download it for free at manualshive.com, empowering yourself with indispensable knowledge for your Dell Inspiron 1000.

Share
Download
background image

Troubleshooting

153

 

NOTICE: 

The 

Operating System

 media provides options for reinstalling Windows. 

The options can overwrite files and possibly affect programs that are installed on 
your hard drive. Therefore, do not reinstall Windows unless a Dell technical support 
representative instructs you to do so.

1

Save and close any open files and exit any open programs.

2

Insert the 

Operating System 

media.

3

Click 

Exit

 if the 

Install Windows 

message appears.

4

Restart the computer.

When the DELL logo appears, press <F12> immediately.

 

NOTE: 

If you wait too long and the operating system logo appears, continue 

to wait until you see the Microsoft Windows desktop, then shut down your 
computer and try again.

 

NOTE: 

The next steps change the boot sequence for one time only. On the 

next start-up, the computer boots according to the devices specified in the 
system setup program.

5

When the boot device list appears, highlight 

CD/DVD/CD-RW Drive

, 

and then press <Enter>.

6

Press any key to 

Boot from CD-ROM

.

7

Follow the instructions on the screen to complete the installation.

 

NOTE: 

You cannot reinstall Dell MediaDirect if you voluntarily reformat the hard 

drive. You need the installation software to reinstall Dell MediaDirect. See 
"Contacting Dell" on page 165.

Restoring Your Microsoft

®

 Windows

®

 XP 

Operating System

•

System Restore returns your computer to an earlier operating state without 
affecting data files. Use System Restore as the first solution for restoring 
your operating system and preserving data files. 

•

Dell PC Restore by Symantec returns your hard drive to the operating state 
it was in when you purchased the computer. It permanently deletes all data 
on the hard drive and removes any programs installed after you received 
the computer. Use Dell PC Restore only if System Restore did not resolve 
your operating system problem.

book.book  Page 153  Friday, October 19, 2007  2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Reviews:

No comments

Related manuals for Inspiron 1000

IBM 3270 Option Instructions preview
3270
Brand: IBM Pages: 18
IBM 3270 Hardware User'S Manual preview
3270
Brand: IBM Pages: 152
Panasonic CF-52 Series Operating Instructions Manual preview
CF-52 Series
Brand: Panasonic Pages: 24
Panasonic CF-H1 Series Supplementary Instructions Manual preview
CF-H1 Series
Brand: Panasonic Pages: 8
Gateway GT5062b User Manual preview
GT5062b
Brand: Gateway Pages: 96
E-Medic Silence TP 1 User Manual preview
Silence TP 1
Brand: E-Medic Pages: 31
Gigabyte BRIX GB-BACE-3150 Quick Start Manual preview
BRIX GB-BACE-3150
Brand: Gigabyte Pages: 2
Lanoptik MV60 User Manual preview
MV60
Brand: Lanoptik Pages: 16
Prentke Romich Company Accent 700 Hardware Manual preview
Accent 700
Brand: Prentke Romich Company Pages: 36
Stage right 600039 User Manual preview
600039
Brand: Stage right Pages: 12
Vecow ECS-9740-505M-GTX1050 User Manual preview
ECS-9740-505M-GTX1050
Brand: Vecow Pages: 111
Contec 955 Series User Manual preview
955 Series
Brand: Contec Pages: 116
Hatteland HT C01 Series User Manual preview
HT C01 Series
Brand: Hatteland Pages: 52
Alpha Microsystems Eagle 250 Owner'S Manual preview
Eagle 250
Brand: Alpha Microsystems Pages: 42
National Instruments MXI User Manual preview
MXI
Brand: National Instruments Pages: 37
Electronic M101H Operating Instructions preview
M101H
Brand: Electronic Pages: 4
Fujitsu Siemens Computers SCENIC S 2 Operating Manual preview
SCENIC S 2
Brand: Fujitsu Siemens Computers Pages: 72
Fujitsu Siemens Computers CELSIUS M430 Operating Manual preview
CELSIUS M430
Brand: Fujitsu Siemens Computers Pages: 90

Brands by name

Popular brands

Load more brands