Dell Inspiron 1000 Owner'S Manual Download Page 49

Page: 49 / 210

Using the Keyboard and Touch Pad

Speaker Functions

Microsoft

Windows

Logo Key Functions

Adjusting Keyboard Settings

To adjust keyboard operation, such as the character repeat rate, open the
Control Panel and click

Keyboard

. For information about the Control Panel,

see the Windows Help and Support Center. To access the Help and Support
Center, see "Windows Help and Support Center" on page 17.

Increases the volume of the integrated speakers and
external speakers, if attached.

Decreases the volume of the integrated speakers and
external speakers, if attached.

Enables and disables the integrated speakers and external
speakers, if attached.

Windows logo key and
<m>

Minimizes all open windows.

Windows logo key and
<Shift><m>

Restores all minimized windows. This command
functions as a toggle to restore (maximize) all
windows previously minimized with the use of the
Windows logo key and <m> key combination.

Windows logo key and <e> Runs Windows Explorer.

Windows logo key and <r> Opens the

Run

dialog box.

Windows logo key and <f> Opens the

Search Results

dialog box.

Windows logo key and
<Ctrl><f>

Opens the

Search Results-Computer

dialog box

(if the computer is connected to a network).

Windows logo key and
<Pause>

Opens the

System Properties

dialog box.

book.book Page 49 Friday, October 19, 2007 2:03 PM

Summary of Contents for Inspiron 1000



















































































































































































































Search results

Summary of Contents for Inspiron 1000

Reviews:

Related manuals for Inspiron 1000

Brands by name

Popular brands

Dell Inspiron 1000, Owner'S Manual

Search results

Summary of Contents for Inspiron 1000

Reviews:

Related manuals for Inspiron 1000

Brands by name

Popular brands