5.
Refer to Figure 5–3 to complete the installation of the drive.
a.
Tighten the two captive screws at the top and bottom of the bracket
(A).
CAUTION
It is normal for there to be a small gap between the mounting bracket
tabs and the enclosure frame. Tighten the captive screws only until
they are securely fastened (9 inch pounds). Do not try to force the tabs
to fit flush against the frame.
b.
Attach the ISE front panel to the enclosure by first fitting the panels
lower tabs into position.
p
Fit the panel into position and secure the panel with its single
captive Phillips screw (B).
TZ-Series Tape Drive 5–5
