2.4 TLZ07 Installation Procedure
Use the following procedure to install the TLZ07 tape drive into a BA400-series
enclosure. Have the system manager shut down the operating system before
installing the tape drive.
CAUTION
Static electricity can damage integrated circuits. Use the antistatic
wrist strap and antistatic pad found in the static-protective field service
kit (29-26246-00) when you work with the internal parts of a computer
system.
1.
Open the top and bottom enclosure doors.
2.
Power off the system and unplug the power cord from the wall outlet.
3.
Loosen the captive Phillips screw (at the top) and remove the drive front
panel and filler panel located in mass storage slot 0.
TLZ-Series Tape Drives 2–3
