Figure 1–8 Installing the ISE in the Storage Cavity
A
Phillips Screw
Front Panel
B
Captive Screws
Finger Cutouts
Guide Tabs
MLO-007244A
7.
Refer to Figure 1–8A and install the ISE.
p
Using the tabs in front of upper and lower finger cutouts, firmly push
the ISE brackets until the interface card at the rear of the storage
device plugs into its backplane connector. The guide tabs on the upper
and lower bracket should line up with the cutouts in the chassis.
1–12 EF- and RZ-Series Integrated Storage Elements
