DATREND Systems vPad-IV, Operating Manual

Page: 30 / 98

vPad-IV OPERATORS MANUAL
Once all secondary Modules have been attached ( Figure 5 ), slide and lock the previously-removed side
panel into place, so that the right side of the analyzer assembly is then covered ( Figure 6 ). The temporary
numeric label applied to the front of each Module may now be removed.
Check the completed assembly to verify that all components are fitted snugly and securely together.
3.2 Connect Cables and Power Supply
If you are assembling a multi-channel analyzer, use the interconnect cables provided with the Modules to
connect the
vPad-IV bus jacks at the rear of the assembly, for example as shown
Figure 7
for a three-
channel setup.
Figure 5 Figure 6
Figure 7
Setup/Chapter 3
#
Page 14