vPad-IV OPERATORS MANUAL
Information
or prompt
Displays test information or instructions for test setup
Inspection or
check
Requires selection of an inspection result from the available options:
PASS:
inspected item is acceptable
FAIL:
inspected item is not acceptable
Service:
repair service or other work was performed to obtain an
acceptable result
N/A:
inspection task does not apply to this device
Info only:
inspection records information only, which is not passed or failed
Back
Pressure
Shows real-time pressure readings, enabling an externally-applied back
pressure or vacuum to be adjusted to match a target which is specified in
the AutoSequence (see also Section 3.5.2 and
Figure 16
on page 20)
Pressure
Monitor
Similar to back pressure, the pressure monitor shows real-time pressure
readings while displaying the average, maximum and minimum value of the
pressure. The user may manually control whether the channel input is
blocked or occluded, or otherwise remains open.
Pump Test
Runs a flow, piggyback, PCA or occlusion test according to a preset configuration
which is defined in the AutoSequence
As users progress through the AutoSequence step-by-step, results of inspections and pump tests are added
to the Test Record. At the end of the AutoSequence, the
Save Test Record
menu is shown in the same
manner as a stand-alone Flow Rate or other test.
4.5.7 View All Channels
The
View All
button opens the analyzer overview, which provides a concise summary of status and
measurement results for all channels (
Figure 38
).
Figure 38
Operation/Chapter 4
#
Page 50
Summary of Contents for vPad-IV
