DATREND Systems vPad-IV, Operating Manual

Page: 57 / 98

vPad-IV OPERATORS MANUAL
4.4 Editing Equipment Details
4.4.1 Equipment Information Editor
Information about the infusion device under test may be optionally entered with the Equipment
Information Editor , which is displayed by the
Equipment Info
button of the Test Setup menu (see
Section 4.3.1 and
Figure 21
on page 28). Details of a work order associated with the device may also be
input. Entered data is copied to the Test Record which is saved on completion of the test. Equipment
information and the work order
type are also saved to an Equipment Record, enabling later recall of the
information following input of the control number or equipment ID.
Most of the text-input fields of the Equipment Information have an associated pick list which is displayed
by a corresponding
Choose
button. Pick lists are not intended to replace a database, but are meant to
provide selectable "favourites" which may need to be entered frequently. Items may be added or removed
from these pick lists by the
List Editor of vPad-IV (see Section 4.8.5 on page 65).
Each text field of the information can be erased by a "long-press" gesture. A "long-press" means to touch
the text field and hold it for a few seconds, until the field is cleared. The soft keyboard will then appear,
enabling input of new information. In addition to the Equipment Information Editor, "erase on long-press"
is implemented on almost all user interface menus of vPad-IV where such text fields appear.
Figure 32
Operation/Chapter 4
#
Page 41