Data Flow Systems TCU800, Installation And Operation Manual

Page: 60 / 162

50
C h a p t e r 6
Methods of Changing Configuration Values
Each editable value under any of the above menus can be changed by choosing the
new value on a bullet list, toggling between enabled and disabled, or entering the
value on the digital keypad that appears. When a value the requires a numerical entry
is selected, a numbered keypad will appear on the screen. Each option can be changed
by clicking on the individual setting and typing the new value in on the keypad that
appears. Once the input is correct press the
SUBMIT key to save the new value.
Another setup for changing configuration values is through a bullet list. Any
configurable value with multiple options will be presented in this way. When the new
value to be configured is selected, the window will disappear. Lastly, the values can
be altered via a digital switch. This method is presented when a configuration option
only has two options. In this editing process, no additional window will appear.
Clicking the configuration option will cause it to toggle between the two options:
Enabled and Disabled.
Remote Configuration Changes
Changing configuration values using the PLC editor is supported but requires that the settings be transferred initially from
the TCU800 to the remote PLC editor (once). If taking this step, disregard the configuration values listed in the Autodialer
section of the editor as the TCU800 does not support Autodialer and the settings have been re-purposed for other use. This
workaround is temporary. If only changing a few configuration values, this step can be bypassed as only the changed values
need to be selected and sent.