Procedure
1. Drill the holes for mounting the backplate as per the drilling template (see
).
2. Connect the backplates via the click and lock method.
e
3
0
b
g
8
0
2
.1
0
Illustration 32: Connecting the Backplates
3. Mount the backplates to the mounting plate in the control cabinet using M5 screws with a minimum head diameter or washer
diameter of 9.5 mm. The tightening torque is 3 Nm.
Mechanical Installation
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 53
Danfoss A/S © 2019.10
Summary of Contents for VLT MSD 510
Page 1: ...Operating Guide VLT Multiaxis Servo Drive MSD 510 System...
Page 2: ......