Table 151: Range:
Min: 1 s
Max: 99 s
Default value: 10 s
6-01 Live Zero Timeout Function
Default value: [0] Off
Parameter type: Option
2-setup: All setups
Conversion index: -
Data type: u_int8
Change during operation: True
Select the timeout function. The function set in
parameter 6-01 Live Zero Timeout Function
is activated if the input signal on terminal
53 or 54 is below 50% of the value in
parameter 6-10 Terminal 53 Low Voltage
,
parameter 6-12 Terminal 53 Low Current
,
parameter 6-20
Terminal 54 Low Voltage
, or
parameter 6-22 Terminal 54 Low Current
for a time period defined in
parameter 6-00 Live Zero Timeout
Time
.
Table 152: Option:
[0]
Off
[1]
Freeze output
[2]
Stop
[3]
Jogging
[4]
Max. speed
[5]
Stop and trip
6-02 Fire Mode Live Zero Timeout Function
Default value: [0] Off
Parameter type: Option
2-setup: All setups
Conversion index: -
Data type: u_int8
Change during operation: True
Select the timeout function when the fire mode is active. The function set in this parameter is activated if the input signal on analog
inputs is below 50% of the low value for a time period defined in
parameter 6-00 Live Zero Timeout Time
.
Table 153: Option:
[0]
Off
[1]
Freeze output
[2]
Stop
[3]
Jogging
[4]
Max. speed
4.8.2 6-1* Analog Input 53
Parameters for configuring the scaling and limits for analog input 53 (terminal 53).
6-10 Terminal 53 Low Voltage
Default value: 0.07 V
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: u_int16
Change during operation: True
Enter the voltage (V) that corresponds to
parameter 6-14 Terminal 53 Low Ref./Feedb. Value
. To activate
parameter 6-01 Live Zero Time-
out Function
, set the value to >1 V.
Table 154: Range:
Min: 0 V
Max: 10 V
Default value: 0.07 V
AU363928304090en-000101 / 130R0982
92 | Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide